LPC2368BD100

产品概述

IC Picture

图片仅供参考

制造商IC编号 LPC2368BD100
厂牌 NXP/恩智浦
IC 类别 MCU-ARM
IC代码 LPC2368

产品详情

脚位/封装 LQFP-100
外包装
无铅/环保 无铅/环保
电压(伏) 3.3 V
温度规格 -40 C~+85 C
速度 72 MHZ
标准包装数量
标准外箱

General description The LPC2364/65/66/67/68 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The LPC2364/65/66/67/68 are ideal for multi-purpose serial communication applications. They incorporate a 10/100 Ethernet Media Access Controller (MAC), USB full speed device with 4 kB of endpoint RAM (LPC2364/66/68 only), four UARTs, two CAN channels (LPC2364/66/68 only), an SPI interface, two Synchronous Serial Ports (SSP), three I2C-bus interfaces, and an I2S-bus interface. This blend of serial communications interfaces combined with an on-chip 4 MHz internal oscillator, SRAM of up to 32 kB, 16 kB SRAM for Ethernet, 8 kB SRAM for USB and general purpose use, together with 2 kB battery powered SRAM make these devices very well suited for communication gateways and protocol converters. Various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, one PWM unit, a CAN control unit (LPC2364/66/68 only), and up to 70 fast GPIO lines with up to 12 edge or level sensitive external interrupt pins make these microcontrollers particularly suitable for industrial control and medical systems.

FFFE/互通料号 (形式,腳位和功能对等)

IC 编号 脚位/封装 电压(伏) 速度 温度规格
LPC2368FBD LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD10 LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100 LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100 PBF LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100#NXP LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100,551 NXP LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100,551 VER.B LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100,557 LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100. LQFP-100 3.3 V 72 MHZ -40 C~+85 C
LPC2368FBD100/01 LQFP-100 3.3 V 72 MHZ -40 C~+85 C