图片仅供参考
制造商IC编号 | MT29F2G08AAAWP |
厂牌 | MICRON/美光 |
IC 类别 | FLASH-NAND |
IC代码 | 256MX8 NAND SLC |
脚位/封装 | TSOP-48 |
外包装 | |
无铅/环保 | 无铅/环保 |
电压(伏) | 3.3 V |
温度规格 | 0 C~+70 C |
速度 | 25 NS |
标准包装数量 | |
标准外箱 | |
Number Of Words | 256M |
Bit Organization | x8 |
Density | 2G |
Production Status | Production |
Package Material | Pb-free |
Generation Feature Set | 1st set of device features |
Speed Grade | Async only |
Package | TSOP I(48-pin CPL version) |
Classification | 1-0-0-1 (Die-nCE-RnB-IO Channels) |
General Description Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection and monitor device status (R/B#). This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign. A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND Flash die. A NAND Flash die is the minimum unit that can independently execute commands and report status. A NAND Flash die, in the ONFI specification, is referred to as a logical unit (LUN). There is at least one NAND Flash die per chip enable signal. For further details, see Device and Array Organization. This device has an internal 4-bit ECC that can be enabled using the GET/SET features. See Internal ECC and Spare Area Mapping for ECC for more information.
IC 编号 | 脚位/封装 | 电压(伏) | 速度 | 温度规格 |
---|---|---|---|---|
H27U2G8FDTR-BC | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
H27U2G8T2CTR-BC | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
H27U2G8T2MTP-BC | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G0808U0MYCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G080U0A-PCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G08U0-PCB000 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G08U0-YCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G08U08A-PCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G08U09M-YCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F2G08U0A-B-PCB | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |