圖片僅供參考
製造商IC編號 | MT29F128G08AJAAA-ITA |
廠牌 | MICRON/美光 |
IC 類別 | FLASH-NAND |
IC代碼 | 16GX8 NAND MLC |
脚位/封装 | TSOP-48 |
外包裝 | |
無鉛/環保 | 無鉛/環保 |
電壓(伏) | 3.3 V |
溫度規格 | -40 C~+95 C |
速度 | 1 MHZ |
標準包裝數量 | |
標準外箱 | |
Number Of Words | 16G |
Bit Organization | x8 |
Density | 128G |
Production Status | Production |
Package Material | Pb-free |
Generation Feature Set | 1st set of device features |
Speed Grade | Async only |
Classification | 1-0-0-1 (Die-nCE-RnB-IO Channels) |
General Description Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (DQx) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection (WP#) and monitor device status (R/B#). This Micron NAND Flash device additionally includes a synchronous data interface for high-performance I/O operations. When the synchronous interface is active, WE# becomes CLK and RE# becomes W/R#. Data transfers include a bidirectional data strobe (DQS). This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign. A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND Flash die. A NAND Flash die is the minimum unit that can independently execute commands and report status. A NAND Flash die, in the ONFI specification, is referred to as a logical unit (LUN). For further details, see Device and Array Organization.
IC 編號 | 數量 | 生產年份 | |
---|---|---|---|
MT29F128G08AJAAA-ITA | 4,000 | 2016+ | 索取報價 |