圖片僅供參考
製造商IC編號 | MT29F4G08ABADAWP-ATD |
廠牌 | MICRON/美光 |
IC 類別 | FLASH-NAND |
IC代碼 | 512MX8 NAND SLC |
共通IC編號 | MT29F4G08ABADAWP-ATDTR |
脚位/封装 | TSOP-48 |
外包裝 | |
無鉛/環保 | 無鉛/環保 |
電壓(伏) | 3.3 V |
溫度規格 | 0 C~+70 C |
速度 | 25 NS |
標準包裝數量 | |
標準外箱 | |
Number Of Words | 512M |
Bit Organization | x8 |
Density | 4G |
Production Status | Production |
Package Material | Pb-free |
Interface | Async only |
Level | SLC |
Generation Feature Set | 4th set of device features (rev only if different) |
Speed Grade | Async only |
Design Revision | T |
Package | TSOP I(48-pin CPL version) |
Classification | 1-1-1-1 (Die-nCE-RnB-IO Channels) |
General Description Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection and monitor device status (R/B#). This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign. A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND Flash die. A NAND Flash die is the minimum unit that can independently execute commands and report status. A NAND Flash die, in the ONFI specification, is referred to as a logical unit (LUN). There is at least one NAND Flash die per chip enable signal. For further details, see Device and Array Organization. This device has an internal 4-bit ECC that can be enabled using the GET/SET features. See Internal ECC and Spare Area Mapping for ECC for more information.
IC 編號 | 脚位/封装 | 電壓(伏) | 速度 | 溫度規格 |
---|---|---|---|---|
K9F4G08U0B-SCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0B/A-PCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0B/D-SCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0BPCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0C-PCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0C-SCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0D-PCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0D-SCB | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0D-SCB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |
K9F4G08U0D-SCB0/SIB0 | TSOP-48 | 2.7V-3.6V | 25 NS | 0 C~+70 C |